LCD Separator Machine is a high-end mobile phone LCD screen repair equipment. For mobile phone screen repair, can detach the cover plate, touch, LCD replacement
Professional cell phone repair LCD screen screen repair equipment manufacturer preferred.
Integrated market press screen printing machine, pressing machine, lamination machine functions, the maintenance market, the development of multifunctional easy to operate equipment. Mainly used for cable and phone screen press.
Professional cell phone repair equipment manufacturer, LCD repair equipment. LCD screen, mobile screen repair equipment preferred!
The machines used for Apple Samsung HTC mobile phone cover, touch screen, display Assembly, split, many phones (including Apple Samsung) displays and touch screens linked together, cover cracked or touch screen damaged and broke off with overall change, cost is very high, our equipment is simple and easy operation, suitable for normal maintenance shops. Low cost, replacement glass cover or touch-screen costs just a few to dozens of Yuan, after changing the complete like new. Where to buy the products the store package technology, purchase accessories.
Third-generation machine with over temperature protection, over-current protection, precise temperature control, extend the service life of the machine.
More reading:
http://www.touch-times.com/manual-oca-polarizing-film-laminator-refurbish-machine-for-iphone-lcd_p0874.html
Showing posts with label Automatic LCD Separator. Show all posts
Showing posts with label Automatic LCD Separator. Show all posts
Monday, 7 December 2015
Monday, 16 November 2015
Glue Remover Machine Introduction
If you want to buy glue remover machine, touch-time is good.Full Automatic Glue Remover Fast Glue Remover Machine for OCA Glue on Iphone LCD Touch Screen，This new model is upgraded from the old one ,now with touch screen , easier for your operatings，Enter into the system:
(1) Exchange Manual and automatic by pressing this button .
(2) The speed of back after manually move forward.
(3) The location value of the location start.
(4) When open this button ,The speed of the forward will be to the fastest speed!
(5) Click this button means keeping the vacuum motor on ,or off.
(6) Click this button to control motor rotation,Click again to off!
(7) Click this button to trachea down,Click again to up!
(8) Click this button to motor at the highest speed back to the origin!
(9) Click this button the electricity opportunities according to (3) the position of the value forward,automatic stop after arrival!
(10) Click this button to platform to move forward!
(11) Click this button to platform to back!
(12) Click the button to enter the abnormal information interface!
Attention :
1. After removing, you can use some alcohol or other solvent to clean the residual glue on the surface.
2. Before removing, please set the temperature of the machine to 200 degree.
3. If you are a new beginer, please take some unused LCD screen to practise, then you can master the skill quickly.
More reading：http://www.touch-times.com/220v-8l-oil-free-air-compressor_p0904.html
(1) Exchange Manual and automatic by pressing this button .
(2) The speed of back after manually move forward.
(3) The location value of the location start.
(4) When open this button ,The speed of the forward will be to the fastest speed!
(5) Click this button means keeping the vacuum motor on ,or off.
(6) Click this button to control motor rotation,Click again to off!
(7) Click this button to trachea down,Click again to up!
(8) Click this button to motor at the highest speed back to the origin!
(9) Click this button the electricity opportunities according to (3) the position of the value forward,automatic stop after arrival!
(10) Click this button to platform to move forward!
(11) Click this button to platform to back!
(12) Click the button to enter the abnormal information interface!
Attention :
1. After removing, you can use some alcohol or other solvent to clean the residual glue on the surface.
2. Before removing, please set the temperature of the machine to 200 degree.
3. If you are a new beginer, please take some unused LCD screen to practise, then you can master the skill quickly.
More reading：http://www.touch-times.com/220v-8l-oil-free-air-compressor_p0904.html
Monday, 9 November 2015
Vacuum LCD Separator Machine
The Vacuum LCD Separator machine is usually kept on 80 degrees. This is the best temperature for success without burning polarizers. The machine produces safe temperatures but if you walk away and leave it there I’m not so sure how safe that would be so just keep that in mind.
I actually prefer this machine a lot more than the clamp version because so many screens nowadays are just completely shattered on the top and bottom and it has always been a problem to cut these screens. A few tricks like super gluing it to the actual hot plate, double siding it down, holding it, or just using the hot plate as a heat pad and cutting it by hand were working for the clamp version which was okay but at the same time you know something else the had to give and finally this machine has hit the market.
Looking at this machine you’re wondering how strong is the vacuum. Trust me this is very strong. I stuck it to a wall and it stayed and was extremely hard to remove. This lcd separator machine comes with an external pump. This gives it a bit more power than the machines with a built in pump would have.
More reading:
http://www.touch-times.com/c/lcd-separator-machine_0200
I actually prefer this machine a lot more than the clamp version because so many screens nowadays are just completely shattered on the top and bottom and it has always been a problem to cut these screens. A few tricks like super gluing it to the actual hot plate, double siding it down, holding it, or just using the hot plate as a heat pad and cutting it by hand were working for the clamp version which was okay but at the same time you know something else the had to give and finally this machine has hit the market.
Looking at this machine you’re wondering how strong is the vacuum. Trust me this is very strong. I stuck it to a wall and it stayed and was extremely hard to remove. This lcd separator machine comes with an external pump. This gives it a bit more power than the machines with a built in pump would have.
More reading:
http://www.touch-times.com/c/lcd-separator-machine_0200
Subscribe to:
Posts (Atom)